Gtechniq C4 Permanent Trim Restorer 15ml

Description

Why use Gtechniq C4 Permanent Trim Restorer?

Gtechniq C4 Permanent Trim Restorer isn’t just a coating. C4 becomes an extension of the plastic it’s protecting to restore trim to like-new condition.

This chemical bond ensures maximum durability. Trim will remain in its new condition for up to two years with one application of Gtechniq C4 Permanent Trim Restorer.

Most other trim restorers or protectants are shiny coatings that sit on top of the plastic. They provide temporary shine and colour restoration, but they disappear fast.

Gtechniq C4 Permanent Trim Restorer actually swaps part of its molecular structure with the surface molecules of your car’s trim.

C4 doesn’t sit on top of the trim – it becomes the trim! That’s how Gtechniq C4 Permanent Trim Restorer keeps your vehicle’s trim looking flawless for two years!

Gtechniq C4 Permanent Trim Restorer renews the colour of the trim, but it does not add artificial gloss. Matte surfaces will remain matte.

Trim pieces will look new, not dressed, to give your vehicle an overall newer

Directions:

• Ensure that you have sufficient product for the job. If you have a vehicle that has a standard amount of trim that you need to coat such as a Porsche 996, or BMW 5 series, then 15ml will be sufficient. If you have a vehicle that has larger areas of trim that need coatings such as a vehicle with black plastic bumpers or a car such as a Mini R53 that has black plastic trim on the sills and wheel arches, you should choose the 30ml bottle
• Do not dilute
• Apply at a temperature above 5 degrees Celsius and not in direct sunlight
• We recommend wearing protective gloves to prevent the product from drying out your skin
• If you are applying indoors ensure that there is adequate ventilation
• Ensure that the surface to be coated is entirely free from fats/oils or previously applied products for this clean trim vigorously with a 1:10 dilution of Gtechniq W2 Universal Cleaner
• Use the lint-free application pads supplied with the C4 Permanent Trim Restorer to spread the coating onto the surface of your trim
• Once you have spread the product onto a single piece of trim, immediately remove excess product using a Gtechniq MF1 ZeroR Microfibre Buff Cloth
• Allow the coating to cure for 12 hours before getting wet
• Use C4 Permanent Trim Restorer within 1 year of purchasing
• The store opened bottles in a dry and cool storage area that’s out of direct sunlight
• We recommend only using opened bottles within three months of opening
• Please note that C4 does not contain any black pigment so if your trim is exceptionally bleached, it may not fully restore it to a new appearance. A good way to test if your trim will be recoloured satisfactorily by the product is to wipe a damp microfibre cloth over the finish. If your trim colour is temporarily restored by the wetness of the cloth then it is most likely that C4 will work to restore your trim
• If coating heavily textured trim you need to ensure that all coating residue is fully removed from the deep crevices of your trim as if not it may turn into an unsightly white powdery residue in the crevices. If you are coating heavily textured trim it is very important you prepare the trim very well using the W2 as described above together with a medium brush. We also recommend using “long pile” microfibre cloths to better remove residue from the crevices of your trim